qmk_firmware/quantum/os_detection.h, branch master QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept) Non-volatile memory data repository pattern (#24356) 2025-03-21T12:38:34+00:00 Nick Brassel nick@tzarc.org 2025-03-21T12:38:34+00:00 2b00b846dce1d1267dfdb2a3c2972a367cc0dd44 * First batch of eeconfig conversions. * Offset and length for datablocks. * `via`, `dynamic_keymap`. * Fix filename. * Commentary. * wilba leds * satisfaction75 * satisfaction75 * more keyboard whack-a-mole * satisfaction75 * omnikeyish * more whack-a-mole * `generic_features.mk` to automatically pick up nvm repositories * thievery * deferred variable resolve * whitespace * convert api to structs/unions * convert api to structs/unions * convert api to structs/unions * fixups * code-side docs * code size fix * rollback * nvm_xxxxx_erase * Updated location of eeconfig magic numbers so non-EEPROM nvm drivers can use them too. * Fixup build. * Fixup compilation error with encoders. * Build fixes. * Add `via_ci` keymap to onekey to exercise VIA bindings (and thus dynamic keymap et.al.), fixup compilation errors based on preprocessor+sizeof. * Build failure rectification. 
* First batch of eeconfig conversions.

* Offset and length for datablocks.

* `via`, `dynamic_keymap`.

* Fix filename.

* Commentary.

* wilba leds

* satisfaction75

* satisfaction75

* more keyboard whack-a-mole

* satisfaction75

* omnikeyish

* more whack-a-mole

* `generic_features.mk` to automatically pick up nvm repositories

* thievery

* deferred variable resolve

* whitespace

* convert api to structs/unions

* convert api to structs/unions

* convert api to structs/unions

* fixups

* code-side docs

* code size fix

* rollback

* nvm_xxxxx_erase

* Updated location of eeconfig magic numbers so non-EEPROM nvm drivers can use them too.

* Fixup build.

* Fixup compilation error with encoders.

* Build fixes.

* Add `via_ci` keymap to onekey to exercise VIA bindings (and thus dynamic keymap et.al.), fixup compilation errors based on preprocessor+sizeof.

* Build failure rectification.
 [Core] `usb_device_state`: consolidate usb state handling across implementations (#24258) 2024-10-18T07:57:08+00:00 Stefan Kerkmann karlk90@pm.me 2024-10-18T07:57:08+00:00 3f9d4644126483bbd937f2be75a8878a1c986630 * usb_device_state: add idle_rate, led and protocol Previously all usb drivers and platform implementations (expect for our oddball atsam) tracked the same two global variables: - keyboard_protocol: to indicate if we are in report or boot protocol - keyboard_idle: for the idle_rate of the keyboard endpoint And a local variable that was exposed trough some indirection: - keyboard_led_state: for the currently set indicator leds (caps lock etc.) These have all been moved into the usb_device_state struct wich is accessible by getters and setters. This reduces code duplication and centralizes the state management across platforms and drivers. Signed-off-by: Stefan Kerkmann <karlk90@pm.me> * usb_device_state: reset protocol on reset The usb hid specification section 7.2.6 states: When initialized, all devices default to report protocol. However the host should not make any assumptions about the device’s state and should set the desired protocol whenever initializing a device. Thus on reset we should always do exactly that. Signed-off-by: Stefan Kerkmann <karlk90@pm.me> * keyboards: fix oversize warnings Signed-off-by: Stefan Kerkmann <karlk90@pm.me> --------- Signed-off-by: Stefan Kerkmann <karlk90@pm.me> 
* usb_device_state: add idle_rate, led and protocol

Previously all usb drivers and platform implementations (expect for our
oddball atsam) tracked the same two global variables:

- keyboard_protocol: to indicate if we are in report or boot protocol
- keyboard_idle: for the idle_rate of the keyboard endpoint

And a local variable that was exposed trough some indirection:

- keyboard_led_state: for the currently set indicator leds (caps lock etc.)

These have all been moved into the usb_device_state struct wich is
accessible by getters and setters.

This reduces code duplication and centralizes the state management
across platforms and drivers.

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

* usb_device_state: reset protocol on reset

The usb hid specification section 7.2.6 states:

When initialized, all devices default to report protocol. However the
host should not make any assumptions about the device’s state and should
set the desired protocol whenever initializing a device.

Thus on reset we should always do exactly that.

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

* keyboards: fix oversize warnings

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

---------

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>
 OS Detection - Entire file should not be wrapped with ifdef (#23108) 2024-02-19T15:37:51+00:00 Joel Challis git@zvecr.com 2024-02-19T15:37:51+00:00 9f95577ef2bfff55bf4f5d19c3dc58ea0f09e014 






[Core] Add OS detection callbacks (#21777)
2024-02-16T14:19:02+00:00

Andre Brait
andrebrait@gmail.com

2024-02-16T14:19:02+00:00

80f3da36e571fa702b1d3df693fd545801250eca












Make "detected_host_os()" available on the SLAVE side of the split keyboard (#19854)
2023-04-03T22:48:51+00:00

ngs-ch
125195794+ngs-ch@users.noreply.github.com

2023-04-03T22:48:51+00:00

ccda5d2d2f0b2e71e16d72636622743a68757b50

Co-authored-by: ngs.ch <ngs.ch>
Co-authored-by: Drashna Jaelre <drashna@drashna.net>





Co-authored-by: ngs.ch <ngs.ch>
Co-authored-by: Drashna Jaelre <drashna@drashna.net>







Detect host OS based on USB fingerprint (#18463)
2022-12-08T16:45:30+00:00

Ruslan Sayfutdinov
ruslan@sayfutdinov.com

2022-12-08T16:45:30+00:00

85ee55ff3becd29e1590376c3462c6a99c976fa0

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>




Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>