qmk_firmware/tmk_core/protocol/usb_device_state.c, branch master QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept) [Core] `usb_device_state`: consolidate usb state handling across implementations (#24258) 2024-10-18T07:57:08+00:00 Stefan Kerkmann karlk90@pm.me 2024-10-18T07:57:08+00:00 3f9d4644126483bbd937f2be75a8878a1c986630 * usb_device_state: add idle_rate, led and protocol Previously all usb drivers and platform implementations (expect for our oddball atsam) tracked the same two global variables: - keyboard_protocol: to indicate if we are in report or boot protocol - keyboard_idle: for the idle_rate of the keyboard endpoint And a local variable that was exposed trough some indirection: - keyboard_led_state: for the currently set indicator leds (caps lock etc.) These have all been moved into the usb_device_state struct wich is accessible by getters and setters. This reduces code duplication and centralizes the state management across platforms and drivers. Signed-off-by: Stefan Kerkmann <karlk90@pm.me> * usb_device_state: reset protocol on reset The usb hid specification section 7.2.6 states: When initialized, all devices default to report protocol. However the host should not make any assumptions about the device’s state and should set the desired protocol whenever initializing a device. Thus on reset we should always do exactly that. Signed-off-by: Stefan Kerkmann <karlk90@pm.me> * keyboards: fix oversize warnings Signed-off-by: Stefan Kerkmann <karlk90@pm.me> --------- Signed-off-by: Stefan Kerkmann <karlk90@pm.me> 
* usb_device_state: add idle_rate, led and protocol

Previously all usb drivers and platform implementations (expect for our
oddball atsam) tracked the same two global variables:

- keyboard_protocol: to indicate if we are in report or boot protocol
- keyboard_idle: for the idle_rate of the keyboard endpoint

And a local variable that was exposed trough some indirection:

- keyboard_led_state: for the currently set indicator leds (caps lock etc.)

These have all been moved into the usb_device_state struct wich is
accessible by getters and setters.

This reduces code duplication and centralizes the state management
across platforms and drivers.

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

* usb_device_state: reset protocol on reset

The usb hid specification section 7.2.6 states:

When initialized, all devices default to report protocol. However the
host should not make any assumptions about the device’s state and should
set the desired protocol whenever initializing a device.

Thus on reset we should always do exactly that.

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

* keyboards: fix oversize warnings

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>

---------

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>
 [Core] Add OS detection callbacks (#21777) 2024-02-16T14:19:02+00:00 Andre Brait andrebrait@gmail.com 2024-02-16T14:19:02+00:00 80f3da36e571fa702b1d3df693fd545801250eca 






Format code according to conventions (#16322)
2022-02-12T18:29:31+00:00

QMK Bot
hello@qmk.fm

2022-02-12T18:29:31+00:00

63646e8906e062d1c1de3925cba70c4e3426a855












haptic: Feature to disable it when usb port is not configured or suspended. (#12692)
2021-11-02T05:54:29+00:00

Purdea Andrei
andrei@purdea.ro

2021-11-02T05:54:29+00:00

76fb54403ccd3ebaf1ca49c5172335e3593c5c5c

This also add support for specifying a LED pin to indicate haptic status,
and also adds support for a haptic-enable pin, which is useful to turn off
the boost converter on the solenoid driver.




This also add support for specifying a LED pin to indicate haptic status,
and also adds support for a haptic-enable pin, which is useful to turn off
the boost converter on the solenoid driver.






Relocate protocol files within tmk_core/common/ (#14972)
2021-10-28T21:31:59+00:00

Joel Challis
git@zvecr.com

2021-10-28T21:31:59+00:00

dcfffa7b67a072f7d9e37bd8c0029c53b61aeb0f

* Relocate non platform files within tmk_core/common/

* clang




* Relocate non platform files within tmk_core/common/

* clang