readme.md (1394B)
1 # sweet16v2 2 3 A 4x4 macropad with per-key RGB lighting and underglow. 4 5 * Keyboard Maintainer: [ziptyze](https://github.com/ziptyze) 6 * Hardware Supported: 1upkeyboards Sweet 16 v2 7 * Hardware Availability: [1upkeyboards](https://1upkeyboards.com/) 8 9 Make example for this keyboard (after setting up your build environment): 10 11 make 1upkeyboards/sweet16v2:default 12 13 Flashing example for this keyboard: 14 15 make 1upkeyboards/sweet16v2:default:flash 16 17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 18 19 ## Bootloader 20 21 Enter the bootloader in 3 ways for atmel-based controllers: 22 23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 24 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available 26 27 28 Enter the bootloader in 2 ways for rp2040-based controllers: 29 30 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 31 * **Bootsel button**: Hold the bootsel button on controller and plug in the keyboard