readme.md (1361B)
1 # waffling60 2 3 A 60% PCB for MX and alps switches, available in different configurations and layout supports. 4 5 More info: https://geekhack.org/index.php?topic=103531.0 6 7 * Keyboard Maintainer: [4pplet](https://github.com/4pplet) 8 * Hardware Supported: [waffling60](https://github.com/4pplet/waffling60) 9 10 Make example for this keyboard (after setting up your build environment): 11 12 make 4pplet/waffling60/rev_d_ansi:default 13 14 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 15 16 How to enter bootloader (DFU): 17 * Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware. 18 19 * Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it or tap the reset button. 20 21 Alternative option if the firmware is already pre-flashed: 22 * Unplug your keyboard, hold down the Esc key, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.