qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1166B)

      1 # Yakiimo Rev A
      2 
      3 * Keyboard Maintainer: [4pplet](https://github.com/4pplet)
      4 * Hardware Supported: Yakiimo Rev A
      5 
      6 Make example for this keyboard (after setting up your build environment):
      7 
      8     make 4pplet/yakiimo/rev_a:via:flash
      9 
     10 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     11 
     12 How to enter bootloader (DFU):
     13 * Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
     14 * Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
     15 
     16 Alternative option if the firmware is already pre-flashed:
     17 * Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.