qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1124B)

      1 # Obi
      2 
      3 ![obi](https://i.imgur.com/btQPol1h.png)
      4 
      5 A 40% keyboard inspired by the TMOv2 and Nightmare boards.
      6 
      7 # General info
      8 
      9 * Keyboard Maintainer: [Arturo Avila](https://github.com/ADPenrose)
     10 * Hardware Supported: Obi v1 PCB
     11 * Hardware Availability: [Arturo Avila](https://github.com/ADPenrose)
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make adpenrose/obi:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make adpenrose/obi:default:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available