qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1237B)

      1 # Zodiark Keyboard
      2 
      3 ![Zodiark Split](https://i.imgur.com/49O8aowl.jpg)
      4 
      5 A split keyboard with 5x7 including a thumbcluster, encoders on each side, per key RGB, and 2x I2C headers per side, supporting 1.3"/.96" 128x64 OLEDs (the 1.3" is an SH1106 OLED, refer to QMK documentation for limitations) and .91" 128x32 OLEDs.
      6 
      7 * Keyboard Maintainer: [Aleblazer](https://github.com/Aleblazer/), [Discord Link](https://discord.gg/BCSbXwskVt)
      8 * Hardware Supported: Pro Micro and derivatives
      9 * Hardware Availability: Pending Group Buy - [Discord Link](https://discord.gg/BCSbXwskVt)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make aleblazer/zodiark:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make aleblazer/zodiark:default:flash
     18 
     19 Remove TRRS cable from halves, plug into one side, press reset button when asked. Repeat process on the other side.
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 Credit to Sofle and Josef Adamcik <josef.adamcik@gmail.com> for OLED and layer code.