qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1224B)

      1 # AlhenKB - Macropad 5x4 and Numpad
      2 
      3 ![Imgur Image](https://imgur.com/t7Zi2w3h.jpg) 
      4 ![Imgur Image](https://i.imgur.com/5xlKJlBh.jpg)
      5 
      6 
      7 A macropad 5x4 for MerryPCB.
      8 
      9 * Keyboard Maintainer: [Alhen](https://github.com/alhenx)
     10 * Hardware Supported: MerryPCB
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14 Macropad:
     15 
     16     make alhenkb/macropad5x4:default
     17     
     18 Numpad:
     19 
     20     make alhenkb/macropad5x4:numpad
     21 
     22 Flashing example for this keyboard:
     23 
     24 Macropad:
     25 
     26     make alhenkb/macropad5x4:default:flash
     27     
     28 
     29 Numpad:
     30 
     31     make alhenkb/macropad5x4:numpad:flash
     32 
     33 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     34 
     35 ## Bootloader
     36 
     37 Enter the bootloader in 3 ways:
     38 
     39 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     40 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     41 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available