qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1131B)

      1 # Minerva LX
      2 
      3 ![Minerva LX](https://i.imgur.com/f97nsrx.jpg)
      4 
      5 The following is the QMK Firmware for the Minerva LX PCB.
      6 
      7 * Keyboard Maintainer: [Archetype](https://github.com/archetype-made)
      8 * Hardware Supported: RP2040-based proprietary PCB.
      9 * Hardware Availability: https://archetypemade.com/minerva-is-here/
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make archetype/minervalx:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make archetype/minervalx:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader Enter the bootloader in 3 ways: 
     22 * **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch)
     23 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if available
     24 * **Physical Reset Button**: With the PCB unplugged, hold down the button labled `RESET` on the back of the PCB while pluggin in the USB.