readme.md (1053B)
1 # ATSET AT2 2 3 A special 2 key keyboard powered by QMK. 4 5 * Keyboard Maintainer: [ATSET](https://github.com/anubhavd7) 6 * Hardware Supported: ATSET AT2 (https://imgur.com/a/yBbVwef) 7 https://www.atsetmediscience.com/atset-at2-9949007.html 8 Make example for this keyboard (after setting up your build environment): 9 10 make atset/at2:default 11 12 Flashing example for this keyboard: 13 14 make atset/at2:default:flash 15 16 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 17 18 ## Bootloader 19 20 Enter the bootloader in 3 ways: 21 22 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 23 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 24 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available