qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1212B)

      1 # BINEPAD BN009
      2 
      3 ![BINEPAD BN009](https://imgur.com/fu0iXD0h.jpg)
      4 
      5 A 9% macropad.
      6 
      7 * Keyboard Maintainer: [binepad](https://github.com/binepad)
      8 * Hardware Supported:
      9     * BN009 R1 *(ft. ATmega32U4)*
     10     * BN009 R2 *(ft. STM32F103)*
     11 * Hardware Availability: [binepad.com](https://www.binepad.com/bn009)
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make binepad/bn009/r1:default
     16 
     17 ..or..
     18 
     19     make binepad/bn009/r2:default
     20 
     21 Flashing example for this keyboard:
     22 
     23     make binepad/bn009/r1:default:flash
     24 
     25 ..or..
     26 
     27     make binepad/bn009/r2:default:flash
     28 
     29 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
     30 Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     31 
     32 ## Bootloader
     33 
     34 Enter the bootloader in 3 ways:
     35 
     36 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key) and plug in the keyboard
     37 * **Physical reset button**: Briefly press the button under the small hole on the back of the macropad
     38 * **Keycode in layout**: Press the key mapped to `QK_BOOT` or `RESET` if it is available