qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1103B)

      1 # BINEPAD BNK9
      2 
      3 ![BINEPAD BNK9](https://i.imgur.com/FrkVRhhh.jpg)
      4 
      5 A 3x3 macropad with a large rotary encoder.
      6 
      7 * Keyboard Maintainer: [binepad](https://github.com/binepad)
      8 * Hardware Supported: BINPAD BNK9
      9 * Hardware Availability: [binepad.com](https://www.binepad.com/product-page/bnk9)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make binepad/bnk9:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make binepad/bnk9:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0x0) in the matrix (the 'knob' / rotary encoder) and plug in the keyboard.
     26 * **Physical reset button**: Briefly press the PCB button located on the back of the PCB.
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` *(or* `RESET` *in VIA)* if it is available.