qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1214B)

      1 # Swoop
      2 
      3 ![Swoop](https://i.imgur.com/mMlmEsdh.jpg)
      4 
      5 *The Swoop is an open source split keyboard based on the Ferris/Sweep.*
      6 
      7 * Keyboard Maintainer: [Jimmerricks](https://github.com/jimmerricks)
      8 * Hardware Supported: *Swoop MX, Swoop LP + Pro-micro or equivalent*
      9 * Hardware Availability: [*Swoop Repository*](https://github.com/jimmerricks/swoop)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make bluebell/swoop:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make bluebell/swoop:default:avrdude-split-right
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Entering the bootloader:
     24 
     25 <!-- * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard -->
     26 * **Physical reset button**: Briefly press the small button on the inner side of the PCB - you may have pads you must short instead
     27 <!-- * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -->