qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1321B)

      1 # equals
      2 
      3 ![equals](https://i.imgur.com/c3adFqsh.jpeg)
      4 
      5 * Keyboard Maintainer: [Cole Smith](https://github.com/boardsource)
      6 * Hardware Supported: Equals PCB w/ RP2040 or Equals Kit w/ Pro Micro
      7 * Hardware Availability: [boardsource](https://boardsource.xyz)
      8 
      9 Make example for this keyboard (after setting up your build environment):
     10 
     11     make boardsource/equals/48:default
     12     make boardsource/equals/60:default
     13     make boardsource/equals/avr:default
     14     
     15 Flashing example for this keyboard:
     16 
     17     make boardsource/equals/48:default:flash
     18     make boardsource/equals/60:default:flash
     19     make boardsource/equals/avr:default:flash
     20     
     21 Compile `avr` firmware if your PCB uses a drop-in microcontroller like Pro Micro.
     22 
     23 
     24 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     25 
     26 
     27 ## Bootloader
     28 
     29 Enter the bootloader in 3 ways:
     30 
     31 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     32 * **Physical reset button**: Briefly press the button on the back of the PCB
     33 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available