readme.md (1046B)
1 # Bredworks Wyvern HS 2 3 * Keyboard Maintainer: [DeskDaily](https://github.com/DeskDaily) 4 * Hardware Supported: Atmega32u4 5 * Hardware Availability: [BredWorks](https://bredworks.com/products/wyvern-hotswap-pcb) 6 7 Make example for this keyboard (after setting up your build environment): 8 9 make bredworks/wyvern_hs:default 10 11 Flashing example for this keyboard: 12 13 make bredworks/wyvern_hs:default:flash 14 15 ## Bootloader 16 17 Enter the bootloader in 3 ways: 18 19 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the upper left key/esc) and plug in the keyboard 20 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 21 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available 22 23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).