qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1283B)

      1 # Cerberus Keyboard by CannonKeys
      2 
      3 This folder contains firmware for both the Solderable and Hotswap version of Cerberus
      4 
      5 The hotswap PCB does not support per-key LEDs and has reduced layout support (no ISO)
      6 
      7 * Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
      8 * Hardware Supported: STM32F072CBT6
      9 
     10 Make example for this keyboard (after setting up your build environment):
     11 
     12     make cannonkeys/cerberus/hotswap:default
     13     make cannonkeys/cerberus/solderable:default
     14     
     15 Flashing example for this keyboard:
     16 
     17     make cannonkeys/cerberus/hotswap:default:flash
     18     make cannonkeys/cerberus/solderable:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     27 * **Physical reset button**: Toggle the switch on the back of the pcb to "1" and briefly press the button on the back of the PCB
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available