qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1151B)

      1 # CannonKeys DB60
      2 
      3 DB60 "Daughterboard 60" Keyboard
      4 
      5 * Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
      6 * Hardware Supported: STM32F072CBT6 (or equivalent)
      7 
      8 Make example for this keyboard (after setting up your build environment):
      9 
     10     make cannonkeys/db60/rev2:default
     11 
     12 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     13 
     14 Some notes about the versions:
     15 The original DB60 was shipped with the J-02. To build that, you will need to use the following command:
     16 
     17     make cannonkeys/db60/j02:default
     18 
     19 Solderable DB60s were shipped with keyboards after the J-02. This variant has cutouts along the top and bottom to support O-ring gasket mounting. To build these, you can use this command:
     20 
     21     make cannonkeys/db60/rev2:default
     22     
     23 Hotswap ANSI DB60s were shipped with the Bakeneko keyboards from CannonKeys. These also have the o-ring gasket mounting points. To build this:
     24 
     25     make cannonkeys/db60/hotswap:default