readme.md (1294B)
1 # Petrichor PCB 2 3 Petrichor PCB from CannonKeys for the AKB Petrichor keyboard 4 (This firmware is used for both the hotswap and solderable variant) 5 6 * Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan) 7 * Hardware Supported: RP2040 8 * Hardware Availability: [CannonKeys](https://cannonkeys.com) 9 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make cannonkeys/petrichor:default 14 15 Flashing example for this keyboard: 16 17 make cannonkeys/petrichor:default:flash 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 4 ways: 24 25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 26 * **Physical reset button**: Hold the "BOOTSEL" button on the back of the PCB and briefly press the "REBOOT" button on the back of the PCB. 27 * **Top side reboot pads**: Bridge the reboot pads on the top of the PCB with a pair of tweezers twice in a row, quickly. 28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available