qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1111B)

      1 # CherryB Studio CB1800
      2 
      3 ![cb1800](https://i.imgur.com/QRJ6DFsl.jpg)
      4 
      5 A G80-1800 inspired PCB for CB1800 Zakabato and any suitable 1800 layout keyboards.
      6 
      7 * Keyboard Maintainer: [lunaticwhat](https://github.com/lunaticwhat)
      8 * Hardware Supported: cb1800, atmega32u4
      9 * Hardware Availability: [CherryB Studio](https://www.reddit.com/r/mechmarket/comments/mneayy/ic_cb1800zanbato_1800_classic_by_cherryb/)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make cherrybstudio/cb1800:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make cherrybstudio/cb1800:default:flash
     18 
     19 ## Accessing Bootloader Mode
     20 
     21 To access Bootloader Mode, do one of the following:
     22 
     23 * Tap the Reset switch mounted on the top side of the PCB to the left of the spacebar
     24 * Hold the top left key of the keyboard while connecting the USB cable
     25 
     26 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).