qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1166B)

      1 # Ghoul TKL
      2 
      3 ![image](https://i.imgur.com/Y39mNA4.jpeg)
      4 
      5 A modern replacement PCB for Filco TKLs, adding support for PCB-mount stabilizers and popular alternate layouts. In-switch backlight LEDs are also supported.
      6 
      7 * Keyboard Maintainer: [chillKB](https://github.com/chillKB)
      8 * Hardware Supported: Ghoul TKL PCB
      9 * Hardware Availability: [Open source on GitHub](https://github.com/chillKB/ghoulTKL)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make chill/ghoul:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make chill/ghoul:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the top left key (usually Escape) and plug in the keyboard
     26 * **Physical reset button**: Hold the boot button and tap the reset button on the back of the PCB
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available