readme.md (1263B)
1 # lfn.merro60 2 3  4 5 - Standard 60% format keyboard PCB with USB-C and unified daughterboard compatibility. 6 - Modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount. 7 - Meant to be manufactured in 2mm thickness. 8 9 * Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b) 10 * Hardware Supported: chlx PCB lfn.merro60.x.x.x 11 12 Make example for this keyboard (after setting up your build environment): 13 14 make chlx/lfn_merro60:default 15 16 Flashing example for this keyboard: 17 18 make chlx/lfn_merro60:default:flash 19 20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 21 22 ## Bootloader 23 24 Enter bootloader mode by any of the following options - 25 - When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard 26 - After plugging in, press and release the reset button on the pcb top-side near the spacebar switch locations 27 - After plugging in, short out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)