readme.md (1699B)
1 # piche60 2 3  4 5 - 60% alice format keyboard pcb with USB-C and unified daughterboard compatibility. 6 - Layout adds 3 additional keys in the palm area voids of traditional alice format. 7 - USB-C can be snapped off and converted into an ai03 C3 compatible daughterboard. 8 - Left and right halves can be snapped off and connected through 14-pin JST-SH interfaces. 9 - PCB can be manufactured with top-side USB-C for compatibility with legacy alice PCBs. 10 11 Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b) 12 Hardware Supported: chlx PCB piche60.x.x.x; top-side USB version compatible with most keyboard cases using legacy alice format PCBs (i.e. lubrigante) 13 Hardware Availability: sales are typically done in-stock as bulk listings on reddit's mechanical keyboard market (r/mechmarket) 14 15 Make example for this keyboard (after setting up your build environment): 16 17 make chlx/piche60:default 18 19 Flashing example for this keyboard: 20 21 make chlx/piche60:default:flash 22 23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 24 25 ## Bootloader 26 27 Enter bootloader mode by any of the following options - 28 - When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard 29 - When already plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region 30 - When already plugged in, shorting out the two reset metal contacts near the 'z' key (accessible through the switch LED slot) 31