readme.md (1298B)
1 # ppr.merro60 2 3  4 5 - Standard 60% format keyboard PCB with USB-C and unified daughterboard compatibility. 6 - Modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount. 7 - Additional center flex cut. 8 - Meant to be manufactured in 1.2mm thickness. 9 10 * Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b) 11 * Hardware Supported: chlx PCB ppr.merro60.x.x.x 12 13 Make example for this keyboard (after setting up your build environment): 14 15 make chlx/ppr_merro60:default 16 17 Flashing example for this keyboard: 18 19 make chlx/ppr_merro60:default:flash 20 21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 22 23 ## Bootloader 24 25 Enter bootloader mode by any of the following options - 26 - When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard 27 - When plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region 28 - When plugged in, shorting out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)