config.h (2081B)
1 /* Copyright 2023 Cipulot 2 * 3 * This program is free software: you can redistribute it and/or modify 4 * it under the terms of the GNU General Public License as published by 5 * the Free Software Foundation, either version 3 of the License, or 6 * (at your option) any later version. 7 * 8 * This program is distributed in the hope that it will be useful, 9 * but WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License 14 * along with this program. If not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #pragma once 18 19 #define MATRIX_ROWS 6 20 #define MATRIX_COLS 16 21 22 #define UNUSED_POSITIONS_LIST { {5, 3}, {5, 5} } 23 24 #define MATRIX_ROW_PINS \ 25 { B6, B5, B12, B10, B13, B7 } 26 27 #define AMUX_COUNT 1 28 #define AMUX_MAX_COLS_COUNT 16 29 30 #define AMUX_EN_PINS \ 31 { A8 } 32 33 #define AMUX_SEL_PINS \ 34 { B14, B15, A9, A10 } 35 36 #define AMUX_COL_CHANNELS_SIZES \ 37 { 16 } 38 39 #define AMUX_0_COL_CHANNELS \ 40 { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15} 41 42 #define AMUX_COL_CHANNELS AMUX_0_COL_CHANNELS 43 44 #define DISCHARGE_PIN A4 45 #define ANALOG_PORT A2 46 47 #define DEFAULT_ACTUATION_MODE 0 48 #define DEFAULT_MODE_0_ACTUATION_LEVEL 550 49 #define DEFAULT_MODE_0_RELEASE_LEVEL 500 50 #define DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET DEFAULT_MODE_0_ACTUATION_LEVEL 51 #define DEFAULT_MODE_1_ACTUATION_OFFSET 70 52 #define DEFAULT_MODE_1_RELEASE_OFFSET 70 53 #define DEFAULT_EXTREMUM 1023 54 #define EXPECTED_NOISE_FLOOR 0 55 #define NOISE_FLOOR_THRESHOLD 50 56 #define BOTTOMING_CALIBRATION_THRESHOLD 50 57 #define DEFAULT_NOISE_FLOOR_SAMPLING_COUNT 30 58 #define DEFAULT_BOTTOMING_READING 1023 59 #define DEFAULT_CALIBRATION_STARTER true 60 61 #define DISCHARGE_TIME 10 62 63 // #define DEBUG_MATRIX_SCAN_RATE 64 #define EECONFIG_KB_DATA_SIZE 201 65 66 // PWM driver with direct memory access (DMA) support 67 #define WS2812_PWM_DRIVER PWMD3 68 #define WS2812_PWM_CHANNEL 1 69 #define WS2812_PWM_PAL_MODE 2 70 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 71 #define WS2812_DMA_CHANNEL 5