qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

config.h (2195B)


      1 /* Copyright 2024 Cipulot
      2  *
      3  * This program is free software: you can redistribute it and/or modify
      4  * it under the terms of the GNU General Public License as published by
      5  * the Free Software Foundation, either version 3 of the License, or
      6  * (at your option) any later version.
      7  *
      8  * This program is distributed in the hope that it will be useful,
      9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
     10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     11  * GNU General Public License for more details.
     12  *
     13  * You should have received a copy of the GNU General Public License
     14  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
     15  */
     16 
     17 #pragma once
     18 
     19 #define MATRIX_ROWS 6
     20 #define MATRIX_COLS 18
     21 
     22 #define UNUSED_POSITIONS_LIST { {0, 13}, {3, 14}, {3, 15}, {3, 16}, {3, 17}, {4, 15}, {4, 17}, {5, 3}, {5, 5}, {5, 7}, {5, 10}, {5, 15} }
     23 
     24 #define MATRIX_ROW_PINS {A15, B5, B12, B10, B6, B7}
     25 
     26 #define AMUX_COUNT 2
     27 #define AMUX_MAX_COLS_COUNT 15
     28 
     29 #define AMUX_EN_PINS {B13, A10}
     30 
     31 #define AMUX_SEL_PINS {A8, A9, B14, B15}
     32 
     33 #define AMUX_COL_CHANNELS_SIZES {15, 3}
     34 
     35 #define AMUX_0_COL_CHANNELS {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}
     36 
     37 #define AMUX_1_COL_CHANNELS {3, 0, 1}
     38 
     39 #define AMUX_COL_CHANNELS AMUX_0_COL_CHANNELS, AMUX_1_COL_CHANNELS
     40 
     41 #define DISCHARGE_PIN A4
     42 #define ANALOG_PORT A2
     43 
     44 #define DEFAULT_ACTUATION_MODE 0
     45 #define DEFAULT_MODE_0_ACTUATION_LEVEL 550
     46 #define DEFAULT_MODE_0_RELEASE_LEVEL 500
     47 #define DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET DEFAULT_MODE_0_ACTUATION_LEVEL
     48 #define DEFAULT_MODE_1_ACTUATION_OFFSET 70
     49 #define DEFAULT_MODE_1_RELEASE_OFFSET 70
     50 #define DEFAULT_EXTREMUM 1023
     51 #define EXPECTED_NOISE_FLOOR 0
     52 #define NOISE_FLOOR_THRESHOLD 50
     53 #define BOTTOMING_CALIBRATION_THRESHOLD 50
     54 #define DEFAULT_NOISE_FLOOR_SAMPLING_COUNT 30
     55 #define DEFAULT_BOTTOMING_READING 1023
     56 #define DEFAULT_CALIBRATION_STARTER true
     57 
     58 #define DISCHARGE_TIME 10
     59 
     60 // #define DEBUG_MATRIX_SCAN_RATE
     61 #define EECONFIG_KB_DATA_SIZE 225
     62 
     63 // PWM driver with direct memory access (DMA) support
     64 #define WS2812_PWM_DRIVER PWMD3
     65 #define WS2812_PWM_CHANNEL 1
     66 #define WS2812_PWM_PAL_MODE 2
     67 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2
     68 #define WS2812_DMA_CHANNEL 5