qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1139B)

      1 # The Clog
      2 
      3 This is the official firmware for a family of boards designed by [smores56](https://github.com/smores56),
      4 the first of which was [the Clog](https://github.com/smores56/clog). This firmware works for the following boards:
      5 
      6 - [The Clog](https://github.com/smores56/clog)
      7 - [The Clog V3](https://github.com/smores56/clog-v3)
      8 - [The Steel Toe](https://github.com/smores56/steel-toe)
      9 - [The Sephirette](https://github.com/smores56/sephirette)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make clog:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make clog:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 2 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     26 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available