readme.md (1417B)
1 # converter/xmk 2 3 `converter/xmk` is the QMK keyboard definition for [𝑥MK](https://github.com/manna-harbour/xmk). 4 5 * Keyboard Maintainer: [Manna Harbour](https://github.com/manna-harbour) 6 * Hardware Supported: Any QMK-compatible MCU board 7 * Hardware Availability: No additional hardware required 8 9 Make example for this keyboard (after setting up your build environment): 10 11 make converter/xmk:default 12 13 Flashing example for this keyboard: 14 15 make converter/xmk:default:flash 16 17 To flash pre-compiled firmware to a pro-micro on Linux without using the `qmk` CLI: 18 19 avrdude -p atmega32u4 -c avr109 -U flash:w:converter_xmk_default.hex:i -P /dev/ttyACM0 20 21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 22 23 ## Bootloader 24 25 Enter the bootloader in 4 ways: 26 27 * **Boot shell command**: Give the `boot` command to the `converter/xmk` shell, e.g. `echo "boot" > /dev/ttyACM0` 28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available 29 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 30 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard