qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1170B)

      1 # kd83a_bfg_edition 
      2 ![KD83A_BFG_EDITION](https://imgur.com/UXuXerrh.png)
      3 ![KD83A_BFG_EDITION](https://imgur.com/Dn852gEh.png)
      4 
      5 An 83 keys keyboard, Equipped with the WestBerry Q95 microcontroller.
      6 
      7 * Keyboard Maintainer: [GSKY](https://github.com/gksygithub)
      8 * Hardware Supported: KD83A_BFG_Edition
      9 * Hardware Availability: [GSKY GitHub](https://github.com/gksygithub/keyboard)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make darkproject/kd83a_bfg_edition:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make darkproject/kd83a_bfg_edition:default:flash
     18 
     19 To reset the board into bootloader mode, do one of the following:
     20 
     21 * Hold the Reset switch mounted on the surface of the PCB back side after the USB cable is connected
     22 * Hold the Escape key while connecting the USB cable (also erases persistent settings)
     23 * Fn+ESC will reset the board to bootloader mode
     24 
     25 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).