readme.md (1024B)
1 # K3 QMK 2 3 * Keyboard Maintainer: [Proceee](https://github.com/Proceee) 4 * Hardware Supported: [Darmoshark](http://www.Darmoshark.cn) 5 * Hardware Availability: [Darmoshark](http://www.Darmoshark.cn) 6 7 Make example for this keyboard (after setting up your build environment): 8 9 make darmoshark/k3:default 10 11 Flashing example for this keyboard: 12 13 make darmoshark/k3:default:flash 14 15 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 16 17 ## Bootloader 18 19 Enter the bootloader in 3 ways: 20 21 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 22 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 23 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available