readme.md (1542B)
1 # Harite v2 (Thumbstick + PMW3389 version) 2 3 5 way switch directional keyboard 4 5  6 7 * Keyboard Maintainer: [Dane Lipscombe](https://github.com/dlip) 8 * Hardware Supported: Harite v2 (Thumbstick + PMW3389 version) 9 * Hardware Availability: <https://github.com/dlip/harite-v2> 10 11 Make example for this keyboard (after setting up your build environment): 12 13 ```bash 14 make dlip/haritev2/thumbstick_pmw3389:default 15 ``` 16 17 Flashing example for this keyboard: 18 19 ```bash 20 # For the left half... 21 make dlip/haritev2/thumbstick_pmw3389:default:uf2-split-left 22 # or the qmk cli equivalent: 23 qmk flash -kb dlip/haritev2/thumbstick_pmw3389 --keymap default -bl uf2-split-left 24 25 # For the right half... 26 make dlip/haritev2/thumbstick_pmw3389:default:uf2-split-right 27 # or the qmk cli equivalent: 28 qmk flash -kb dlip/haritev2/thumbstick_pmw3389 --keymap default -bl uf2-split-right 29 ``` 30 31 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 32 33 ## Bootloader 34 35 Enter the bootloader in 3 ways: 36 37 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 38 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 39 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available