readme.md (1107B)
1 # FRLTKL 2 3 PCB that supports FRLTKLs designed by dnworks, such as DNDD and HITC. 4 5 * Keyboard Maintainer: [Zeix](https://github.com/itsme-zeix) 6 * Hardware Supported: DNDD Solder PCB rev1 & HITC Solder PCB rev1 7 * Hardware Availability: [dnworks.co](https://dnworks.co/) 8 9 Make example for this keyboard (after setting up your build environment): 10 11 make dnworks/frltkl:default 12 13 Flashing example for this keyboard: 14 15 make dnworks/frltkl:default:flash 16 17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 18 19 ## Bootloader 20 21 Enter the bootloader in 3 ways: 22 23 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 24 * **Physical reset button**: Briefly press the `RESET` button twice or short the `USB_BOOT` and `GND` pads and plug in the keyboard 25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available