qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1124B)

      1 # dnworks TKL (F12)
      2 
      3 ![997.3 TKL](https://i.imgur.com/iPPLKg1h.jpeg)
      4 
      5 PCB that supports the F12 TKLs designed by dnworks.
      6 
      7 * Keyboard Maintainer: [Zeix](https://github.com/itsme-zeix)
      8 * Hardware Supported: 997.3 Solder PCB rev1, 765LT Solder PCB rev1 and Best Friend Solder PCB Rev1.
      9 * Hardware Availability: https://dnworks.co/products
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make dnworks/tkl87:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make dnworks/tkl87:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down escape and plug in the keyboard
     26 * **Physical reset button**: Short the 'USB_BOOT' button and plug in keyboard or press the 'RESET' button twice with the keyboard plugged in.
     27 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available