qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1274B)

      1 # KB16-01 (Revision 1)
      2 
      3 ![KB16-01](https://i.imgur.com/lpq47ELh.png)
      4 
      5 A macropad that have 16-key keyboard made by DOIO, which controlled by an Atmega32u4 chipset. The keyboard features per-key RGB, 3 encoder and an OLED screen for displaying useful information.
      6 
      7 * Keyboard Maintainer: [HorrorTroll](https://github.com/HorrorTroll)
      8 * Hardware Supported: Atmega32u4
      9 
     10 Make example for this keyboard (after setting up your build environment):
     11 
     12     `make doio/kb16/rev1:default`
     13     or with the qmk cli:
     14     `qmk compile -kb doio/kb16/rev1 -km default`
     15 
     16 Flashing example for this keyboard:
     17 
     18     `make doio/kb16/rev1:default:flash`
     19     or with the qmk cli:
     20     `qmk flash -kb doio/kb16/rev1 -km default`
     21 
     22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     23 
     24 ## Bootloader
     25 
     26 Enter the bootloader in 3 ways:
     27 
     28 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (1! key) and plug in the keyboard
     29 * **Physical reset button**: Briefly press the button on the back of the PCB
     30 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available