qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1355B)

      1 # DP3000
      2 
      3 ![dp3000 macropad](https://i.imgur.com/uBHS8EYh.jpg)
      4 
      5 dp3000 is a simple yet elegant macropad, 2x4 (8 keys), dual encoder, embedded with an Atmel 32u4 chip, powered by QMK.
      6 * Rev. 1 Support RGB matrix
      7 * Rev. 2 Support RGB light (underglow)
      8 * Keyboard Maintainer: [Deddia Permana](https://github.com/depermana12)
      9 * Hardware Supported: DP3000 PCB rev1 and rev2, ATmega32u4
     10 * Hardware Availability: [tokopedia.com/gundamtricks](https://www.tokopedia.com/gundamtricks)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make dp3000/rev1:default
     15     make dp3000/rev2:default
     16 
     17 Flashing example for this keyboard:
     18 
     19     make dp3000/rev1:default:flash
     20     make dp3000/rev2:default:flash
     21 
     22 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     23 
     24 ## Bootloader
     25 
     26 Enter the bootloader in 3 ways:
     27 
     28 * Bootmagic reset: Hold down the key at (0,0) in the matrix (left rotary encoder push switch) and plug in the keyboard
     29 * Physical reset button: Briefly press reset button twice, located in front of the first rotary encoder (left rotary encoder)
     30 * Keycode in layout: Press the key mapped to QK_BOOT if it is available