readme.md (1349B)
1 # dumbpad 2 3  4 5 dumbpad is a num/macro pad available in two major form factors - single- and dual-rotary encoder. 6 7 * Single-encoder PCBs are reversible - components can be soldered to either side to allow 8 the encoder to be on either the left or right side. 9 * Dual-encoder PCBs come in two versions - one with the encoders in the bottom corners, the otherin the top corners 10 11 Support for dumbpad all PCB revisions can be found in this directory. 12 13 * Maintainer: [imchipwood](https://github.com/imchipwood) 14 * PCB repository: [dumbpad on github](https://github.com/imchipwood/dumbpad) 15 * PCB revisions: 16 * v0.x - these revisions have two LEDs for layer indication 17 * ['v0x'](v0x/): Default setup for single rotary encoder v0.x PCBs 18 * ['v0x_right'](v0x_right/): Same as v0x but with rotary encoder on right side (components on bottom of PCB) 19 * ['v0x_dualencoder'](v0x_dualencoder/): Dual-encoder PCBs 20 * v1.x - these revisions have three LEDs - two for layer indication, one for numlock indication 21 * ['v1x'](v1x/): Default setup for v1.x PCBs with a single rotary encoder on the left side 22 * ['v1x_right'](v1x_right/): Same as v1x but with rotary encoder on right side (components on bottom of PCB) 23 * ['v1x_dualencoder'](v1x_dualencoder/): v1x PCB with two rotary encoders