qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1162B)

      1 # dumbpad v3.x - rgb & hotswap
      2 
      3 ![dumbpad](https://i.imgur.com/ND03FiFl.png)
      4 
      5 A 4x4 numpad/macropad with a rotary encoder to the left of the bottom row of keys.
      6 
      7 -   Keyboard Maintainer: [imchipwood](https://github.com/imchipwood) // [deveth0](https://github.com/deveth0)
      8 -   Hardware repository: [dumbpad on github](https://github.com/imchipwood/dumbpad)
      9 -   PCB Revisions Supported: v3.1
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make dumbpad/v3x:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make dumbpad/v3x:default:flash
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 -   **Bootmagic reset**: Hold down the encoder and plug in the keyboard
     24 -   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     25 -   **Keycode in layout**: Press the key mapped to `RESET` if it is available
     26 
     27 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).