readme.md (1030B)
1 # AKIRA 2 3 * Keyboard Maintainer: [eugenepy](https://github.com/eugenepy) 4 * Hardware Supported: AKIRA pcb, both Hotswap and solderable. 5 * Hardware Availability: Not yet on groupbuy 6 7 # Build 8 Make example for this keyboard (after setting up your build environment): 9 10 make ekow/akira:default 11 12 Flashing example for this keyboard: 13 14 make ekow/akira:default:flash 15 16 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 17 18 ## Bootloader 19 20 Enter the bootloader in 3 ways: 21 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 22 * **Physical reset button**: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short. 23 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available 24