qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1614B)

      1 # EnvKB 60F
      2 
      3 ![Image of the EnvKB 60F PCB](https://i.imgur.com/c5xMEg0h.png)
      4 
      5 
      6 A low cost Standard 60% Design which takes inspiration from the CFTKB Mysterium.
      7 
      8 * Keyboard Maintainer: [Envious-Data](https://github.com/envious-data)
      9 * Hardware Supported: EnvKB 60F (Pi Pico)
     10 * Hardware Availability: [GitHub](https://github.com/Envious-Data/Env-KB60F)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make enviousdesign/60f:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make enviousdesign/60f:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
     27 * **Physical reset**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button.
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, replacing the Tab key.
     29 
     30 After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.
     31