qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1580B)

      1 # EnvKB MCRO
      2 
      3 ![Image of EnvKB MCRO PCB](https://i.imgur.com/QnANWnBh.png)
      4 
      5 A small 12 Key macro pad for various uses
      6 
      7 * Keyboard Maintainer: [Envious-Data](https://github.com/envious-data)
      8 * Hardware Supported: EnvKB MCRO (Pi Pico)
      9 * Hardware Availability: [GitHub](https://github.com/Envious-Data/Env-MCRO)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make enviousdesign/mcro:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make enviousdesign/mcro:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
     26 * **Physical reset**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button.
     27 * **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-created keymaps, but you may assign this key in any keymaps you create.
     28 
     29 After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.
     30