qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1120B)

      1 # FAve 65S, Solder Ver
      2 
      3 ![head](https://i.imgur.com/4Sc42zO.jpg)
      4 ![tail](https://i.imgur.com/hgCPtWg.jpg)
      5 
      6 * Keyboard Maintainer: [ERA](https://github.com/eerraa)
      7 * Hardware supported: LINWORKS
      8 * Hardware availability: [LINWORKS](https://allthatkeyboard.com/)
      9 
     10 Make example for this keyboard (after setting up your build environment):
     11 
     12     make era/linx3/fave65s:default
     13 
     14 Flashing example for this keyboard:
     15 
     16     make era/linx3/fave65s:default:flash
     17 
     18 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     19 
     20 ## Bootloader
     21 
     22 Enter the bootloader in 3 ways:
     23 
     24 * **Bootmagic reset**: Hold down the key at ESC(0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     25 * **Physical reset button**: Briefly short the `RESET` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard
     26 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available