readme.md (1052B)
1 # N86 2 3 * Keyboard Maintainer: [ERA](https://github.com/eerraa) 4 * Hardware supported: Syryan & Linx3 5 * Hardware availability: [Syryan](https://srind.mysoho.com/) & [Linx3](https://allthatkeyboard.com) 6 7 Make example for this keyboard (after setting up your build environment): 8 9 make era/linx3/n86:default 10 11 Flashing example for this keyboard: 12 13 make era/linx3/n86:default:flash 14 15 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 16 17 ## Bootloader 18 19 Enter the bootloader in 3 ways: 20 21 * **Bootmagic reset**: Hold down the key at ESC(0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 22 * **Physical reset button**: Briefly short the `RESET` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard 23 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available