qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1253B)

      1 # eternal_keypad
      2 
      3 ![eternal_keypad](https://i.imgur.com/BAzc343.png)
      4 
      5 A 36 key gaming keypad that can be assembled and configured for both left and right handed mouse users.
      6 
      7 * Keyboard Maintainer: [duckyb](https://github.com/duckyb)
      8 * Hardware Supported: ETERNAL Keypad
      9 * Hardware Availability: Open Source, files available on [gitHub](https://github.com/duckyb/eternal-keypad)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make eternal_keypad:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make eternal_keypad:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 * **Bootmagic reset**: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard
     26 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (activated by holding the lower right key and tapping the lower left key)
     27 * **Physical reset button**: Briefly sort the pads labeled "RST" and "GND" on the micro-controller