qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1595B)

      1 # Wave
      2 
      3 ![Wave Keyboard](https://i.imgur.com/Lz45D3z.png)
      4 
      5 _The Wave is a small, reversible keyboard inspired by the [Ferris](https://github.com/pierrechevalier83/ferris), the [Ferris Sweep](https://github.com/davidphilipbarr/Sweep), the [Swoop](https://github.com/jimmerricks/swoop) and the [Sweep36](https://github.com/sadekbaroudi/sweep36). It aims to put together everything I like about these other models and to solve a few issues I found with them._
      6 
      7 -   Keyboard Maintainer: [Etienne Collin](https://github.com/etiennecollin)
      8 -   Hardware Supported: [Wave](https://github.com/etiennecollin/wave)
      9 -   Hardware Availability: Print the PCB with gerber files from [latest release in the repository](https://github.com/etiennecollin/wave/releases/latest)
     10 
     11 Make example for this keyboard (after setting up your build environment):
     12 
     13     make etiennecollin/wave:default
     14 
     15 Flashing example for this keyboard:
     16 
     17     make etiennecollin/wave:default:flash
     18 
     19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     20 
     21 ## Bootloader
     22 
     23 Enter the bootloader in 3 ways:
     24 
     25 -   **Bootmagic reset**: Hold down the top left key of the left half of the keyboard and plug in the keyboard
     26 -   **Physical reset button**: Briefly press the reset button on the front of the PCB or short the GND and RST pins on the controller
     27 -   **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available