readme.md (1650B)
1 # humble40 2 3  4 5 A 12.5u WKL 40% offering uniform and standard row stagger configurations. 6 7 * Keyboard Maintainer: [Eye Oh Designs](https://github.com/joedinkle) 8 * Hardware Supported: humble40 (RP2040 MCU) 9 * Hardware Availability: Group buy took place between 2022-06-17 1900 UTC and 2022-07-09 0400 UTC on [Eye Oh Designs](https://eyeohdesigns.com/) 10 11 Make example for this keyboard (after setting up your build environment): 12 13 make eyeohdesigns/humble40:default 14 15 Flashing example for this keyboard 16 17 make eyeohdesigns/humble40:default:flash 18 19 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 20 21 ## Bootloader 22 23 Enter the bootloader in 3 ways: 24 25 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving. 26 * **Physical reset button**: Short the two holes in the PCB marked `TP6` and plug the board in. 27 * **Keycode in layout**: There is no key mapped to `QK_BOOT` in the pre-provided keymaps, but you may assign this key in any keymaps you create. 28 29 ## Flashing 30 31 After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.