qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1242B)

      1 # fatotesa
      2 
      3 ![fatotesa](https://i.imgur.com/LbxQcU2.png)
      4 
      5 This is the QMK firmware for the [fat-o-tesa](https://github.com/stefangluszek/fat-o-tesa) keyboard.
      6 
      7 * Keyboard Maintainer: [Stefan Gluszek](https://github.com/stefangluszek)
      8 
      9 Make example for this keyboard (after setting up your build environment):
     10 
     11     make fatotesa:default
     12 
     13 Flashing example for this keyboard:
     14 
     15     make fatotesa:default:flash
     16 
     17 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     18 
     19 ## Bootloader
     20 
     21 Enter the bootloader in 3 ways:
     22 
     23 * **Bootmagic reset**: Hold down the key at (4,1) in the matrix and plug in the keyboard - this is somewhat unusual choice but our split halves are not symmetrical and we can't use (0,0) but instead a key that maps to the same matrix position regardless of which part is being connected to the computer and flashed.
     24 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     25 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available