qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1288B)

      1 # Blue Team Pad
      2 
      3 ![blue_team_pad](https://i.imgur.com/U8LNofvh.jpeg)
      4 
      5 An open source macropad for the cyber security analyst.
      6 
      7 The Blue Team Pad is a RP2040 based 4x5 macropad with two rotary encoders and OLED display.
      8 
      9 It was specifically designed with the maximum possible space for macros supported by QMK. This allows the analyst to store various triage & remediation commands for quick access.
     10 
     11 * Keyboard Maintainer: [Thomas Autiello Jr](https://github.com/fearherbs1)
     12 * Hardware Supported: Custom RP2040 Based PCB
     13 * Hardware Availability: https://github.com/fearherbs1/blue-team-pad 
     14 
     15 Make example for this keyboard (after setting up your build environment):
     16 
     17     make fearherbs1/blue_team_pad:default
     18 
     19 Flashing example for this keyboard:
     20 
     21     make fearherbs1/blue_team_pad:default:flash
     22 
     23 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     24 
     25 ## Bootloader
     26 
     27 Enter the bootloader in 2 ways:
     28 
     29 * **Bootmagic reset**: Hold down the upper left encoder and plug in the keyboard
     30 * **Physical reset button**: Briefly short the two "BOOT" pads on the back side of the pcb