readme.md (1009B)
1 # Avalon PCB by FJLaboratories 2 3 The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards. 4 5 * Keyboard Maintainer: [mrnoisytiger (FJLaboratories)](https://github.com/mrnoisytiger) 6 * Hardware Supported: Avalon 7 8 Make example for this keyboard (after setting up your build environment): 9 10 make fjlabs/avalon:default 11 12 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 13 14 ## Bootloader 15 16 Enter the bootloader in 3 ways: 17 18 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard 19 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead 20 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available