qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1489B)

      1 # frobiac/blackbowl
      2 
      3 ![frobiac/blackbowl](https://i.imgur.com/nehpp3fh.jpeg)
      4 
      5 Custom 3D-printed and handwired 36-key split-keyboard with trackpoint developed in 2016.
      6 
      7 * Keyboard Maintainer: [frobiac](https://github.com/frobiac)
      8 * Hardware Supported: Teensy-2.0, IBM Trackpoint, one MCP23018 per side, one RGB-LED
      9 * Development History: [deskthority.net](https://deskthority.net/viewtopic.php?p=344785#p344785)
     10 * Layout [Alpha KLE](http://www.keyboard-layout-editor.com/#/gists/6a6ec84d59fc346effbe894af159eabd) (same as BlackBowl)
     11 * [Original Firmware](https://github.com/frobiac/adnw)
     12 
     13 Make example for this keyboard (after setting up your build environment):
     14 
     15     make frobiac/blackbowl
     16 
     17 Flashing example for this keyboard:
     18 
     19     make frobiac/blackbowl:flash
     20 
     21 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     22 
     23 
     24 The I2C code is based on the code from 'handwired/dactyl',
     25 but reduced to ROW2COL and EXPANDER_COL_REGISTER=GPIOA define choices.
     26 Adjustments were made for the two I2C addresses, one per side.
     27 
     28 
     29 ## Bootloader
     30 
     31 Enter the bootloader in 2 ways:
     32 
     33 * **Physical reset button**: Briefly press the button on the Teensy by inserting a small pin in the small hole in the switch plate
     34 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
     35 
     36