qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1327B)

      1 # handwired/3dp660_oled
      2 
      3 ![handwired/3dp660_oled](https://i.imgur.com/AQ6VQfgh.jpg)
      4 
      5 *A handwired FC660 layout with OLED display support.*
      6 
      7 * Keyboard Maintainer: [xia0](https://github.com/xia0)
      8 * Hardware Supported: ATmega32U4 e.g. Arduino Pro Micro or Teensy 2.0
      9   * Note: If using a Pro Micro, pins B0 and D5 are required. [Click for details](https://golem.hu/guide/pro-micro-upgrade/).
     10 * Hardware Availability: [Printables](https://www.printables.com/model/464322-3dp-fc660-v3-oled-hand-wired-mechanical-keyboard)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make handwired/3dp660_oled:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make handwired/3dp660_oled:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 ## Bootloader
     23 
     24 Enter the bootloader in 3 ways:
     25 
     26 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     27 * **Physical reset button**: Briefly press the button on the MCU or short RST to GND.
     28 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available