qmk_firmware

QMK firmware for my keyboards (Corne, Sweep Ferris) and trackball (Ploopy Adept)
Log | Files | Refs | Submodules | LICENSE

readme.md (1349B)

      1 # BareDev (rev1)
      2 
      3 ![PCB](https://i.imgur.com/byquO5u.png)
      4 ![Prototype Build](https://i.imgur.com/fkizunN.png)
      5 
      6 An open-source, ABNT2-based 70% keyboard, focusing in a smaller footprint while retaining all the functions found on a TKL (Del and arrow keys doubling as the navigational cluster)
      7 
      8 * Keyboard Maintainer: [Fernando "ManoShu" Rodrigues](https://github.com/ManoShu)
      9 * Hardware Supported: BareDev rev1 PCB
     10 * Hardware Availability: Files available on [GitHub](https://github.com/ManoShu/BareDev)
     11 
     12 Make example for this keyboard (after setting up your build environment):
     13 
     14     make handwired/baredev/rev1:default
     15 
     16 Flashing example for this keyboard:
     17 
     18     make handwired/baredev/rev1:default:flash
     19 
     20 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
     21 
     22 
     23 ## Bootloader
     24 
     25 Enter the bootloader in 3 ways:
     26 
     27 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
     28 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
     29 * **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available